Oil-immersed Type Transformer Pointer-Type Oil Level Gauge
Introduction:
This oil level gauge is suitable for the oil level indication and high and low oil level alarm in transformer's oil
conservator. Its usage is convenient and it possesses the double functions that are direct indication on-the-spot
and outputting switch signal for long distance monitoring. It is an oil level monitoring gauge indispensable for
transformer's oil conservator.
Structure:
The oil level gauge is composed by display part, alarm part, transmission part and sensing part.
○The display part is composed by 2 parts that are pointer and indicating dial.
○The alarm part is composed by magnet (or cam )and switch.
○The transmission part is composed by swing block, change-over change gear and magnetic coupling device.
○The sensing part is floating ball or diaphragm of oil conservator.
Work principle:
When the oil level in transformer's oil conservator rises or drops, along with it the floating ball of the oil level
gauge or the diaphragm of the oil conservator floats up and down and drives the swing block to swing up and
down. The swing block, through the transmission part and magnetic coupling device, drives the pointer of
display part to rotate and thus makes the oil level of transformer's oil conservator display on the dial.
When the oil level rises to the highest or drops to the lowest oil level, the pointer indicates to the maximum or
the minimum position and at the same time releases alarm signal.
Environment condition and main technical parameter:
○Environment temperature: -30ºC~55ºC
○Environment relative humidity: not more than 90%(20ºC)
○Precision: 2.5 degree
○Alarm error: less than ±2.5% of the total dial
○Contact capability: AC 220V 1A; DC 220V 0.5A
○Insulation performance: Power frequency 50Hz, 2000V, 1minute;
○Sealing performance: 245 KPa, for 20 minutes without leakage.
○Protection degree: IP55
Choosing for usage and ordering:
When choosing and using oil conservator in transformer design please choose and use the corresponding oil
level gauge and swing block length (the central distance between the center of the floating ball and hinge point)
referring to drawing 5, chart 1,2 and 3 to make sure of the correctness between the display value of oil level
gauge and real oil position.
Please mark out when ordering:Oil level gauge type
○Referring to chart 2, please mark out if needing special specification dimension
○Referring to chart 3, please mark out if needing special swing block length because there is much difference
between the oil level gauge installing position and the related one in the chart.
The type and its meaning of the oil level gauge.
For type specification see chart 1
For installing dimension of the oil level gauge see chart 2.
For the common used specification of the length of swing block of oil level gauge (the distance between the
center of floating ball and hinge point) see chart 3
For the shape dimension of oil level gauge see drawing 1
Choosing for usage and ordering
When choosing and using oil conservator in transformer design please choose and use the corresponding oil
level gauge and swing block length (the central distance between the center of the floating ball and hinge point)
referring to drawing 5, chart 1,2 and 3 to make sure of the correctness between the display value of oil level
gauge and real oil position.
○Please mark out when ordering:Oil level gauge type
○Referring to chart 2, please mark out if needing special specification dimension
○Referring to chart 3, please mark out if needing special swing block length because there is much difference
between the oil level gauge installing position and the related one in the chart.
Our Performance:
FAQ For You
Our advantages:
Quality Assurance
--From the very beginning, VILLE ensures quality in every step to achieve the best quality.
Experience Sharing
--With more than 30 years' experience in power industry, VILLE brings you an optimized solution.
Global Service
--Wherever you are, VILLE global network will support and provide you with value.
Quick Response
--In response to your needs without delay, VILLE knows the value of your time.
Thanks for choosing VILLE as your reliable partner and
please trust both of us will create a brilliant future!
Introduction:
This oil level gauge is suitable for the oil level indication and high and low oil level alarm in transformer's oil
conservator. Its usage is convenient and it possesses the double functions that are direct indication on-the-spot
and outputting switch signal for long distance monitoring. It is an oil level monitoring gauge indispensable for
transformer's oil conservator.
Structure:
The oil level gauge is composed by display part, alarm part, transmission part and sensing part.
○The display part is composed by 2 parts that are pointer and indicating dial.
○The alarm part is composed by magnet (or cam )and switch.
○The transmission part is composed by swing block, change-over change gear and magnetic coupling device.
○The sensing part is floating ball or diaphragm of oil conservator.
Work principle:
When the oil level in transformer's oil conservator rises or drops, along with it the floating ball of the oil level
gauge or the diaphragm of the oil conservator floats up and down and drives the swing block to swing up and
down. The swing block, through the transmission part and magnetic coupling device, drives the pointer of
display part to rotate and thus makes the oil level of transformer's oil conservator display on the dial.
When the oil level rises to the highest or drops to the lowest oil level, the pointer indicates to the maximum or
the minimum position and at the same time releases alarm signal.
Environment condition and main technical parameter:
○Environment temperature: -30ºC~55ºC
○Environment relative humidity: not more than 90%(20ºC)
○Precision: 2.5 degree
○Alarm error: less than ±2.5% of the total dial
○Contact capability: AC 220V 1A; DC 220V 0.5A
○Insulation performance: Power frequency 50Hz, 2000V, 1minute;
○Sealing performance: 245 KPa, for 20 minutes without leakage.
○Protection degree: IP55
Choosing for usage and ordering:
When choosing and using oil conservator in transformer design please choose and use the corresponding oil
level gauge and swing block length (the central distance between the center of the floating ball and hinge point)
referring to drawing 5, chart 1,2 and 3 to make sure of the correctness between the display value of oil level
gauge and real oil position.
Please mark out when ordering:Oil level gauge type
○Referring to chart 2, please mark out if needing special specification dimension
○Referring to chart 3, please mark out if needing special swing block length because there is much difference
between the oil level gauge installing position and the related one in the chart.
The type and its meaning of the oil level gauge.
For type specification see chart 1
For installing dimension of the oil level gauge see chart 2.
For the common used specification of the length of swing block of oil level gauge (the distance between the
center of floating ball and hinge point) see chart 3
For the shape dimension of oil level gauge see drawing 1
Choosing for usage and ordering
When choosing and using oil conservator in transformer design please choose and use the corresponding oil
level gauge and swing block length (the central distance between the center of the floating ball and hinge point)
referring to drawing 5, chart 1,2 and 3 to make sure of the correctness between the display value of oil level
gauge and real oil position.
○Please mark out when ordering:Oil level gauge type
○Referring to chart 2, please mark out if needing special specification dimension
○Referring to chart 3, please mark out if needing special swing block length because there is much difference
between the oil level gauge installing position and the related one in the chart.
Our Performance:
| 1. | Pre sale service |
| a. | make technical solution |
| b. | send quotation, technical data sheet and drawing |
| c. | prepare power transmission plan, testing plan,and shipment plan |
| 2. | In sale service |
| a. | supervise the manufacturing schedule totally in accordance with the plan |
| b. | send photos to customer during every manufacturing process(hold point) |
| c. | inform the customer one week before testinng. |
| 3. | After sale service |
| a. | installation and commissioning, training the workers |
| b. | quick response within 12 hours any time |
| c. | provide 12 months gurantee period normally. |
FAQ For You
| 1. Q: | What is your delivery time ? |
| A: | Depend on the type of transformer. |
| 2. Q: | What is your payment term? |
| A: | 30% advance by T/T , 70% before delivery by T/T or L/C or we can discuss about it. |
| 3. Q: | What kind of starndard you follow? |
| A: | IEC, ANSI, CSA, GB, etc |
| 4. Q: | What kind of supporting documentation you can provide normally |
| A: | Quotation,outline drawing,manufacturing plan, quality control plan testing plan, financial report, type test report(KEMA, CESI),reference list,etc |
| 5. Q: | What is your normal wanrranty period? |
| A: | 12 months after transformer operation. |
| 6. Q: | Can u do installation and commissioningin user's site? |
| A: | Yes, we can send our installation team to user's country for service. |
| 7. Q: | Do you have any experience in this kind of transformer? |
| A: | Yes, we can provide reference list for check. |
| 8. Q: | Are you manufacturer or trading company? |
| A: | Manufacturer and Trading company. |
Our advantages:
Quality Assurance
--From the very beginning, VILLE ensures quality in every step to achieve the best quality.
Experience Sharing
--With more than 30 years' experience in power industry, VILLE brings you an optimized solution.
Global Service
--Wherever you are, VILLE global network will support and provide you with value.
Quick Response
--In response to your needs without delay, VILLE knows the value of your time.
Thanks for choosing VILLE as your reliable partner and
please trust both of us will create a brilliant future!