magnetic level gauges 

1. Easy to install, no extra piping required in most applications
2. Magnetic level gauge Visual level indication up to 30m, sections made suit for delivery. Magnetostrictive level indicator can reach 30m measure range with cable insertion.
3. Ideal for high-temperature, high-pressure and corrosive applications.
4. Magnetostrictive and radar transmitter options for non-invasive and/or redundant level control.
5. Available with HART, 4~20mA, and level switches.

Floats UHC Floats are specifically calibrated to match the conditions of the vessel. The density, operating pressure and temperature are taken into account, ensuring that the inferred level is accurate and repeatable.
Floats material: SUS304, SUS316, PTFE, PP, and Titanium.
Anticorrosive material: such as stainless steel SUS 304 or SUS316L, Teflon PTFE, polypropylene (PP), FRP and advanced tech. application such as X-ray detection, cold-rolling broaching weld, all ensure that the product can be adapted to any demand at site. Additional blow off valve can be added onto the bottom sealing type of the tube when necessary.
 
Your application is unique, All U-ideal instruments are custom-made based on your requirements.

U-ideal mounting styles
No matter what your application, we can design and manufacture a magnetic level indicator to fit. Above are our standard mounting styles, but if none of these meet your needs we will come up with the best solution based on your requirements.
NOTE: Style "4" is for through process piping only. Other connections shown are examples of typical process connections and need to be specified.

Typical pictures of magnetic level indicators

Model Selection Table
Basic selection of magnetic level indicator please refer to the following steps:
Remark: Manufactured customized is available for this product.
 
Can make to Sections if gauge is longer than 3m to make suitable for delivery.


Special working conditions magnetic level gauge
UHC - V side-top mounted high viscous liquid Float level gauge
UHC - V side-top mounted high viscous liquid type Float level gauge is suitable for the petrochemical tank liquid level measurement system, and especially suitable for heavy oil, tar, crude oil, resin of high viscosity medium liquid level detection.
 
 

1. C-C: 500 ~ 10000 mm, long gauge can be section made.
2. Process connection: size DN6 ~ DN200, flange standards (GB, JB/T, HGJ, ANSI, DIN, etc).
3. Lead tube material: 304SS; 316SS; 316L
4. Float material: 304SS; 316L, Titanium
5. Working pressure: 0 ~ 1.6 MPa
6. Working temperature: - 20 ~ 200 ºC
7. Accuracy: + / - 10 mm
8. Medium density: 0.65 ~ 2.0 g/cm3
9. Medium viscosity: 1.5 Pa s. or less

 

Top mounted vaporizing fluid float level gauge
UHC -T Top mounted vaporizing fluid special using magnetic float level gauge is suitable for liquid measurement which is easy vaporization in pressure vessels, especially for buried tank of liquid level measurement such as liquefied petroleum gas, methane. This model level gauge adopts of a set of three pure titanium floats and unique guide rail structure, with stable and reliable product performance, strong practicability, now is widely used in LPG stations.

 

1. Measuring range: 300 ~ 3000 mm. 
2. The process connection: flange size is 6 ~ DN200, flange standards (GB, JB/T, HGJ, ANSI, DIN, etc) please declare when ordering.
3. Lead tube material: stainless steel 1Cr18Ni9Ti; 304SS; 316SS; 316L
4. Float material: Titanium
5. Working pressure: -0.1 ~ 4 MPa
6. Working temperature: - 80 ~ 80 ºC
7. Accuracy: + / - 10 mm
8. Medium density: 0.4 ~1.2 g/cm3
9. Medium viscosity: 0.4 Pa s.

 
Model Selection: